alaskaferro.blogg.se - Sheetcam post processor

Sheetcam post processor generator#
Sheetcam post processor software#
Sheetcam post processor code#
Sheetcam post processor download#

We encourage our users to submit any commonly available post-processors that are not in this list to and we will add it to the list below.

Sheetcam post processor generator#

Please note that once you have downloaded a post, it can be easily configured and/or customized using the Post Processor Generator product available in both the free as well as the commercial versions of the software. The next time you post-process a toolpath from inside the CAM plug-in, this newly downloaded post-processor will show up in the list of available post-processors to choose from. spm file) and move in into the corresponding folder under the Posts folder under the CAM plug-in installation folder.

Sheetcam post processor download#

To use post-processor from the list, download the post (a.

Sheetcam post processor software#

Employment Opportunity / RFQ (Request for Quote).The following is the list of post-processors that will work with MecSoft CAD/CAM Software products.

Hopefully this helps, there is a G-code and M-code ref in mach3 that you should check out. you need to use this bigtime so that your torch doesnt try and move down to the material and then rapid to its next cut point dragging the tip all over the steel, and thats only if your lucky, steel isnt exactly a solid flat surface so you could be ramming the torch into the steel and it could be a bad situation. On most Windows computers, the Post Processor folder is located at C:\Program Files (x86)\SheetCam TNG\Posts but you will need to verify. Under job options you can set a rapid clearance. Next, you will need to navigate to the folder on your computer where the Post Processor files for SheetCAM are stored so that you can copy the FireControl-v1.6.scpost file into this folder. What your machine is (or was) doing is sending the torch to the travel height (Z0.0000) and then moving rather than going to a nice height, say Z1.0000 seeing as your in inches, and THEN doing its travel. which post processor to use with sheetcam Is it the same one I downloaded to use in Fusion360 Im using the mach3 software to cut. My guess would be you didnt set the correct travel or safe height. so 500rpm, in your case this doesnt actually matter because its plasma. How do I set the speed of the z movement when the torch plunges for stock.

I have been having issues with certain settings under sheet cam. I have drawn a simple square and applied the thc300 post processor to it.

Sheetcam post processor code#

Thanks for any help in advanceI would hguess you got this worked out by now but.į#, in your case F1 is the feedrate when you use G1, G0 is a rapid movement so the feedrate doesnt actually affect that. hello all, I am a newbie trying to learn the code of the thc300 post processor. N0100 G00 Z0.0000 (i assume this is the plunge, How do I change the g00 for a specific feed rate) N0240 G02 X4.7975 Y5.8531 I-0.6400 J0.0000Īlso can someone explain certain functions within the posted g-code as i do not understand them. N0010 (Post processor: Plasma THC300.post) How do I set the rapid speed of the z axis when the torch is motion.Īttached is the. I have changed the the plunge rate though the "plasma cutter properties page" with no successĢ.

I am a newbie trying to learn the code of the thc300 post processor.